Nokia Unlock Code Instructions

How to Enter Unlock Codes For ANY Nokia Cellphone

-If your Nokia phone gives you a message saying "RESTRICTED", shut down your phone, remove the simcard, power on phone and perform the "CODE ENTRY" instructions below.

-If your phone doesn't say "RESTRICTED", make sure your phone has a simcard from any other provider (other the the one the phone is locked to) and perform the "CODE ENTRY" instructions below.

-If you entered a bad code too many times and get the error "NOT ALLOWED", then your counter is blocked and only a cable method will unlock your phone.

CODE ENTRY INSTRUCTIONS
-You will received a code that looks something like this: #pw+Unlock Code+1#
-Every digit, symbol, number and letter that you receieved must be entered without any spaces. Follow the directions below to find put how to get the # p w and +

P appears after pressing 3 times the button ( * )
W appears after pressing 4 times the button ( * )
+ appears after pressing 2 times the button ( * )

- after entering your unlock code the phone should show "SIM Restriction Off". Youg Nokia is now unlocked.

IF + 1 not work try + 7

like this: #pw+Unlock Code +7#

--------------------------------------------------------------------------------
HP iPaq Series 6315, 6325, 6300, 6515, more:

1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue bootingOR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.

*If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried...." You must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
dowload here : http://rapidshare.com/files/93634021/SP29760_6315.zip.html
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM

--------------------------------------------------------------------------------
SPV Unlock Code Entry Instructions

Model : All SPV

1 - Switch ON mobile with a not Allowed SIM Card,
2 - Enter Unlock Code we send to you.

Model : SPV C500

1 - Switch ON mobile with a not Allowed SIM Card,
2 - The message "PUK2" appear,
3 - Enter the Unlock Code we send to you.
4 - Phone ASK for New Code PIN enter : 0000
5 - Confirm and compose : 0000**
6 - Click "Finish" and phone will show "Network is locked..."
7 - Enter the Unlock Code we send to you and click "Finish"
8 - Restart the Mobile who is Unlocked !